SANYO - SOLARMODULE
HIT - N 220 E01
HIT - N 215 E01
AR (anti-reflection) Glass
More sunlight with less reflection from
the glass
More effective in the morning and
evening when the sun is at low position
The SANYO HIT® (Heterojunction with Intrinsic Thin layer) solar cell is made of a thin mono crystalline silicon wafer surrounded by ultra-thin amorphous silicon layers. This product provides the industry‘s leading performance and value using state - of-the -art manufacturing techniques.
Benefit in Terms of Performance
The HIT® cell and module have very high conversion efficiency in mass production.
| Model | Cell Efficiency | Module Efficiency |
|---|---|---|
| HIT-N220E01 | 19,8% | 17,4% |
| HIT-N215E01 | 19,3% | 17,1% |
Environmentally-Friendly Solar Cell
More Clean Energy
HIT® can generate more clean Energy than other conventional crystalline solar cells.
Special Features
SANYO HIT solar modules are 100% emission free, have no moving parts and produce no noise. The dimensions of the HIT modules allow space -saving installation and achievement of maximum output power possible on given roof area.
Development of HIT® solar cell was supported in part by the New Energy and Industrial Technology Development Organization (NEDO).
Models HIT-N220E01 / HIT-N215E1
| Electrical data | N220E01 | N215E01 |
|---|---|---|
| Maximum power (Pmax) [W] | 220 | 215 |
| Max. power voltage (Vpm) [V] | 41,6 | 40,9 |
| Max. power current (lpm) [A] | 5,31 | 5,27 |
| Open circuit voltage (Voc) [V] | 50,9 | 50,5 |
| Short circuit current (Isc) [A] | 5,72 | 5,69 |
| Warranted min. power (Pmin) [W] | 209,0 | 204,3 |
| Maximum over current rating [A] | 15 | 15 |
| Output power tolerance [%] | +10/-5 | +10/-5 |
| Max. system voltage [Vdc] | 1000 | 1000 |
| Temperature coeff. of Pmax [%/°C] | -0,30 | -0,30 |
| Temperature coeff. of Voc [V/°C] | -0,127 | -0,126 |
| Temperature coeff. of Isc [mA/°C] | 1,72 | 1,71 |
Note 1: Standard test conditions: Air mass 1.5, Irradiance = 1000 W/m2,
Cell temperature = 25°C.
Note 2: The values in the above table are nominal.
High performance at high temperatures
Even at high temperatures, the HIT® solar cell can maintain higher efficiency than a conventional crystalline silicon solar cell.
Guarantee
Product: 5 years
Power output: 10 years (90% of Pmin),
20 years (80% of Pmin)
Full conditions are available on SANYO website.
Download pdf
 | |
| |
| |
| |
| |
| |
|